XS Power
Intelli
CHARGER
User Guide
Chapter 3
Chapter 3 will help you identify and remedy the common problems than can occur with the
Intelli
CHARGER. Please read this chapter before calling Customer Service. If you cannot solve the
problem with the
Intelli
CHARGER, record the information asked for on “Information About Your System”
on the back page and then call Customer Service.
WArNiNG: electric shock hazard
Do not disassemble the
Intelli
CHARGER. The
Intelli
CHARGER does not contain any internal
user-serviceable parts and attempting to service the unit yourself could result in electrical
shock or burn.
• Fan does not come on when the power switch is flipped to ON:
- Check fuse.
- Check cord and input power.
• Charging LED will not illuminate if:
- The battery is not connected.
- The battery is below 4.0V.
• Charge rate does not come up to the selected charge rate initially:
- The battery charger has already moved into stage two charging.
- Input voltage is below 120 VAC.
- The battery may be defective and resisting the charge current.
Troubleshooting
6
important:
Specifications are subject to change without notice.
Physical specifications
- Dimensions ....................... 7
1/8
” W x 5
5/8
” H x 9
5/8
” D
- Weight ............................... 14 lbs (6.43 kg)
- AC Input Connections ........ 5.0’ (1.5 m) AWG 18
- DC Output Connections ...... 6.0’ (1.8 m) AWG 10
electrical specifications
16V
- Absorption Voltage ............. 19.20 VDC
- Float Voltage at no Load ..... 18.08 VDC
- Maximum Output Voltage ... 19.20 VDC
AC input specifications
- AC Input Voltage ................ 120 VAC, 60 Hz
- AC Input Current ................ 8A RMS fuse protected
Appendix A
specifications
XS Power
Intelli
CHARGER
User Guide
Appendix A
7
