2
1- Plug the suitable home adaptor into a power outlet.
2- Connect the USB-C to the USB-C Input/Onput Port.
1- Connect the blue plug into the Jump Start Port and make sure
that the cable indicator is turned off.
2- Connect the red clamp to the positive (+) battery terminal and
the black clamp to the negative (-) battery terminal.
3- Operate following the instruction of the cable indicator.
4- Start the vehicle.
5- When the vehicle is started, remove the jumper cable clamps from the vehicle battery.
6- Leave the vehicle running to recharge the battery.
OPERATING GUIDELINES(cont)
PB-13.0 CHARGING INSTRUCTIONS
VEHICLE JUMP STARTING INSTRUCTIONS
(KKV(KKV
(KKV(KKV
RED light on, with buzzing:
Saying the vehicle battery is low,
press “BOOST” and wait for the
green light to become solid.
Within 30 seconds, start the
engine.
NO lights on, with no buzzing:
This indicates the vehicle’s
battery may be damaged. After
confirming the clamps are
correctly connected, press
“BOOST” and wait for the green
light to come on and start the
engine within 30 seconds.
GREEN light blinking with
buzzing:
This indicates the vehicle battery
has low voltage. Press “BOOST”
and wait for the green light to
stop blinking and start the engine
within 30 seconds.
GREEN light on:
Ensure the connection is correct
and the circut is working, you
can start the engine to jump start
diectly.
(559:
XK\KXYK
IUXXKIZ
(559:
XK\KXYK
IUXXKIZ
POWER SUPPLY TO VEHICLE
1- Plug the optional power cable into th 15V, 10A Output Port.
2- Connect the optional power cable and vehicle product or electronics.
3- Press the power button to power on the device.
