06
7.2 SPEED SETTING
---Highest Speed --Normal Speed --Low Speed
7.3 WEIGHING UNIT SETTING
Under the weighing state, press
“CONVERSION” to choose the unit.
There are 4 units :g/ct/oz/mg.
7. 4 COUNTING FUNCTION
There are counting functions in the balance, And please keep the products
have the same weight, and the minimum weight must be ≥0.5mg.
1.Choose the sample quantity which you will put on the pan
2.Touch the weighing value you want weighing,here is the sample weight,after
the weighing stable touch again, the result will check and store.
3.Touch here and weighing the total weight, and touch again check the weight.
4.The quantity will be show here.
05
2.0 SPECIFICATIONS
Model
BL224 Touch
Range
0-220g
Division
0.1mg
Repeatability
0.2mg
Linearity
0.3mg
Resp. Time
≤ 4 Sec.
Pan Size
ø80mm
Interface
RS-232 bi-directional
Overall
Dimensions
340 x 215 x 350mm
Operating
temperature
+10°C to 40°C
Power Supply
Output voltage 5 VDC, 600mA through
External Power Adapter as standard (Input Voltage220 V)
Net Weight
8.5 kg
3.0 UNPACKING THE BALANCE
Remove the balance from the packing by carefully lifting it out of the box.
Inside the box you will find everything needed to start using the balance
4.0 CALIBRATION THE BALANCE
Press”CAL” key, and it will show and shining: CAL-XXX.XXXX,and the
balance begin internal calibration.
You also can choose manual calibration with standard weight, and there will
have the notes tell you step by step:
