2
WEIGHING
When the balance is warmed up and calibrated, 0.00g is shown in the display indicating
weighing mode, put the object on the plate. Wait for the stability, the weight of the object is
shown in the display.
TARE
When a loader is put over the plate, its weight is shown in the display, press function key
TARE
, 0.00g will be shown in the display, indicating the weight of the loader is deducted.
Put the object into the loader, when stable, the figure shown in the display is the weight of
the object.
PIECE COUNTING
Remove all loads from the plate, press function key
TARE
to clear the readings in the
display, press function key
PCS
to enter counting mode, figure 10(default sampling
quantity) will be shown in the display, weighing unit changes from
g
to
pcs
.
Put 10 samples on the plate, press function key
PCS
, the balance will show
“-----“ before it
shows 10 pcs in the display, the balance enters counting mode.
Notice
:
In counting mode, the weight of the sampling objects should be even, the weight
of the individual sample should not be less than the division of the balance.
Return to Weighing Mode
:
Press function key
PCS
to return to Weighing mode.
Unit Conversion
Press function key
UNIT
to change from weighing unit ct/oz/lb/g, default weighing unit is
set to g.
POWER SAVING MODE
Press and hold function key
PCS
for 3 seconds,
OFF
will appear in display, press function
key
PCS
once,
ON
will appear in display, press function key
PCS
again, 0.00g will show
in the display, the balance enters power saving mode, the balance will enter standby state
in 10 seconds.
Make the same operation to exit power saving
