12
UM Termometri serie 7Vio ENG rev.0 14.04.2021
Temp settings parameter
•
In measure mode press
to access the SETUP menu;
•
Press the button
to access the
TEMP SETTINGS P7.0 menu
;
•
Move with the keys
and
to select the program you want to access.
In the table below is the structure of the Setup menu for the parameter, for each program are reported the
options that the user can choose and the default value:
Temp settings Menu
Program
Description
Options
Factory Default Settings
P7.1
THERMOCOUPLE
K – T
K
P7.2
OFFSET SETTINGS
± 5 °C (±10 °C per Temp7 K/T Vio)
---
P7.6
RESET SETTINGS
YES – NO
NO
P7.1 Thermocouple (only for Temp7 K/T Vio)
Go to this Setup to set the type of thermocouple used (K - T).
P7.2 Offset settings
Go to this Setup to set offset.
Note
: Access the menu only with the temperature probe connected.
If menu P 7.2 is accessed without a temperature sensor connected,
the display will show the error message: "CONNECT THE PROBE", accompanied by the flashing icon
.
Note
: For the Temp7 K/T Vio thermometer, pay particular attention to the type of thermocouple
connected and the lit yellow icon at the top of the display. Depending on the type of probe set, the
Offset of the probe will be changed.
P7.6 Reset settings
Access this Setup to reset the parameters in the Temp settings menu.
The reset will reset all values to the default values shown in the table above.
Note
: When the reset is complete, the instrument returns to measurement mode and the
parameters are reset to their default settings.
Instrument Setup Menu
•
In measurement mode press to access the SETUP menu
to access the SETUP menu;
•
Press the
or
key to move to the
SETTINGS
menu
P9.0
;
•
Press the
button to access the menu;
•
Use the
and
buttons to select the programme you wish to access.
