The following diagram demonstrates the typical installation for a PPPoE network:
However in this case the modem is now also acting as the router and terminating the
PPPoE connection, i.e. it is acting as the PPPoE client.
When the DSL modem is used as a router, it will also need to be configured so that
any public address that it receives on the WAN is forwarded via a One-to-One NAT
mapping to a private address on the LAN side of the DSL modem/router.
The process used to configure the DSL device is different for each type of DSL
device, however most provide a simple web-based interface which can be accessed
in order to configure the PPPoE connection, switch the modem from bridge mode to
route mode, and setup the NAT mapping.
Содержание EdgeXOS
Страница 1: ...EdgeXOS PPPoE Configuration...
