The terms “understeer” and “oversteer” appear throughout this manual. These terms describe a particular handling characteristic of the car.
Understeer
Also known as “push.”A car understeers when the front wheels do not grip enough and the rear tires grip too much. This results in a front end that
slides too much rather than turning. A car that understeers is easier to drive, but it is slower than a car that oversteers slightly.
Oversteer
Also known as “loose.”A car oversteers when the front wheels grip too much and the rear tires do not grip enough. This results in a rear end that
slides too much. Excessive oversteer causes the rear tires to “break loose” allowing the car to spin out.
TERMINOLOGY
SET-UP ORdER
We recommend setting up your car in the order indicated in the table below. The order of the settings has been determined as the most logical to set
up your car properly and easily. Also, certain settings must be made before others, as changing one setting will impact another setting.
The table below gives you a breakdown of what components need to be attached on the car, and what you will need to measure the setting. When
setting up your T car, use the components of the Hudy All-In-One Set-Up Solution as follows.
CAR
SET-UP COMPONENTS
Shocks
Anti-roll
Bars
Wheels
Set-Up
Stands
Droop
Gauges
ride Height
Gauge
Toe Gauge
Tweak Station
Downstops
detach
detach
remove
not used
use
not used
not used
not used
ride Height
attach
attach
attach
not used
not used
use
not used
not used
Droop
attach
attach
attach
not used
not used
not used
not used
not used
Track-width
attach
doesn’t
matter
remove
use
not used
not used
not used
use
camber & camber rise
attach
detach
remove
use
not used
not used
not used
not used
caster
attach
doesn’t
matter
remove
use
not used
not used
not used
not used
Toe
attach
doesn’t
matter
remove
use
not used
not used
use
not used
Steering Throw Symmetry
attach
doesn’t
matter
remove
use
not used
not used
use
not used
Tweak
attach
use/don’t
use
remove
use
not used
not used
not used
use
107715 rIDe HeIGHT GAUGe
·
CNC-machined high-grade aluminum
·
precision engraving
·
measures ride height
108211 SeT-Up BOArD DecAl
·
self-adhesive set-up decal for 10801 Set-Up Board
·
accurate, clear markings with 1mm grid for adjustment of 1/10 touring cars
·
tough, smooth, liquid-resistant plastic surface
108201 SeT-Up BOArD
·
suitable for 1/10 R/C touring cars
·
exceptionally flat, warp-resistant surface
·
very small, compact size
·
provides perfectly flat reference surface
for chassis set-up
SETTING UP THE XRAY T2
