18
This is a feature to encrypt the incoming and outgoing voice. Voice Encryption function
for each channel can be set through CPS in Digital mode. Total number of available voice
encryption is from 0 to 65535 and its code can be set via CPS program.
3)
VOX
This function allows transmitting without using the PTT button.
VOX sensitivity level can be adjusted from 1~5 with 5 being the most sensitive and the
sensitivity can be set via the CPS program.
4)
Lone walker
This function can inform others about your safety within the time set in the menu. Set-up
time is from 1 to 100 minutes.
5) BCL/BCLO (Busy Channel Lockout / Busy Channel Lockout Override)
This function prevents interference when the current channel is busy.
BCL (Busy Channel Lockout): Transmission is prohibited when the current channel is busy.
BCLO (Busy Channel Lock Override): Transmission is allowed regardless of busy channel.
6) Keypad (Button) Lock
This function locks the button to prohibit the accidental press of keys and buttons.
When the keypad lock is set, all keys/buttons are locked except the PTT button, the
emergency button, and power ON/OFF button. If any of these buttons are pushed, the
keypad lock will enable again after 25 seconds from the pressing of the last button.
Press the P1 button for 2 seconds to temporarily unlock.
7) Tones
This function enables or disables the tones.
Additional tone settings can be set via CPS program
.
8) LCD BACKLIGHT
This function enables or disables the LCD backlight ON/OFF.
9) LCD Brightness
The function is to adjust the contrast/brightness of the LCD from 1 to 7 levels.
