Installation Instructions
Follow these instructions to install the Front Receiver
Hitch to your Bronco high winch mount.
Release pressure on winch rope by disengaging
winch and pull out about 1′ of rope to make sure winch
does not move when bolts are loosened.
Remove 4 bolts Fig.1 holding winch and confirm they
are 10mx1.5 bolts. Add hitch receiver plate with
flanged end facing forward Fig. 2. Attach provided
flange bolts in the same 4 holes. Tension bolts to
recommended torque from winch manufacturer.
Rated for up to 350lbs
(Total combined with
accessories and gear) , but weight limit is determined
by bumper and winch mount.
Do not exceed rating for winch mount and or vehicle
bumper.
Fig.1
Fig.2
Suggested tools:
10mm socket Wrench
or
Adjustable wrench
Not Included
x 4
Included:
10 x 1.5 x 40mm
