Xprinter XP-470 Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 40

Xprinter XP-470 Series Скачать руководство пользователя страница 6

4.

Introduction

Thank you for purchasing the Xprinter XP-470/ XP-450/ XP-460/ XP-425B Series Direct
Thermal BarCode Printer. Although it is a compact desktop printer, it is reliable and with
Superior throughput performance.

This printer provides direct thermal printing at user selectable speed of: 2.0, 3.0, 4.0, 5.0,
inches per second. It accepts roll feed, die-cut, and fan-fold labels for direct thermal printing.
All common barcodes formats are available. Fonts and barcodes can be printed in 4
directions, 8 different alphanumeric bitmap fonts and a build-in true type font capability. You
will enjoy high throughput for printing labels with this printer.

2. Getting Started

2.1 Unpacking and Inspection

This printer has been specially packaged to withstand damage during shipping. Please
carefully inspect the packaging and printer upon receiving the barcode printer. Please
retain the packaging materials in cover you need to reship the printer.

2.2 Equipment Checklist











Printer
BarTender UltraLite CD disk
Quick start guide
USB port cable
External universal switching power supply
Power Cord
Label Spindle
Fixing tab x2
1.5” core adapter x2

If any parts are missing, please contact the Customer Service Department of your
purchased reseller or distributor.

3

«
...
4
5
6
7
8
...
»

Содержание XP-470 Series









































Отзывы:

Нет отзывов