Page 4
Can Location for TYPE A
Can Location for TYPE B
Mercedes C (up to 2007)/CLC/CLK
Mercedes S/CL Class
Mercedes C (2007 - up)/GLK
Mercedes E (W212)
Mercedes Sprinter
Volkswagen Crafter
Mercedes Vito/Viano
Mercedes E (W211)/CLS
Can H: Brown/Red
Can H:
Brown/Red
Can H:
Brown/Red
Can H:
Brown/Red
Can H:
Brown/Red
Can L:
Brown
Can L:
Brown
Can L:
Brown
Can L:
Brown
Can H: Brown/Red
Can H: Brown/Red
Can H: Brown/Red
Can L: Brown
Can L: Brown
Can L: Brown
Can L: Brown
Mercedes ML/GL/R
Rev.: 20150626
Platform: DBALL2
Firmware: MRC01
© 2014 Directed. All rights reserved.
&
Flashes
IGN
START
OFF
KEY
Key at IGN
IGN
START
OFF
KEY
Remove Key
Module reset will be done automatically upon programming.
2
When the LED turns ON orange release the IPB.
The LED turns ON red.
&
&
Solid Orange
Solid Red
Release
5
4
Turn the Ignition OFF
&
3 Sec
Off
Wait until the LED turns ON solid green for 3 seconds, then turns OFF.
The module has been successfully programmed.
Refer to the LED Diagnostics section on page 7 for more information and for troubleshooting purposes.
3
Turn the Ignition ON using Key or PTS
IGN
START
OFF
KEY
Remove Key
IGN
START
OFF
KEY
Key at IGN
&
Flashes
1
Connect the 10-pin & 12-pin harnesses to the module.
Press & hold the Integrated Programming button (IPB),
then connect the 4-pin D2D (
only in D2D)
& 14-pin harness
to the module (
in D2D & W2W)
.
10-pin
D2D
st
1
th
5
12-pin
14-pin
nd
2
rd
3
th
4
Press Twice Push-to-Start (PTS) to turn the Ignition ON
START
STOP
START
STOP
E
E
N
N
GI
E
E
N
N
GI
x2
x1
or
or
