Quick Reference Guide
DBALL/DBALL2-FORD3 Range Extender Ready (RXT) Installation
© 2016 Directed. All rights reserved.
Range Extender Ready (RXT) is used to amplify the distance covered
by factory remote starters. The interface connects to the vehicle and
uses the same code as the factory remote to remote start the vehicle.
The runtime and features are identical to the OEM remote starter.
Some of the advantages of RXT are greater remote range and 2-way
compatibility.
Range Extender Ready (RXT)
Command
Engine
Result
Start
NOT running.
The engine will be started.
Start
Running.
The engine will be stopped.
The following table describes the behavior of the vehicle in relation to the RXT
feature. The following commands are performed on the aftermarket remote.
Runtime
The runtime is equivalent to the amount set for the OEM remote starter, which can
be modified in some vehicles (refer to your vehicle owner’s manual for more
information). A maximum of 2 remote starts can be performed between ignition
cycles.
Runtime Reset
The Runtime Reset feature allows the user to return the runtime to its predefined
value. This can only performed ONCE per remote start.
RXT Operations
Button(s)
Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote
start.
Press & hold for 5 seconds to activate
the trunk release (optional).
Press once, then to activate the
rear hatch/tail glass release (optional).*
Press 3 times, then to activate
the panic mode.
Press once, then to reset the
remote starter runtime.
List of Available Commands
x1 +
x3 +
x1 +
* This output is configurable. see your authorized installation center for more
information.
Note that the information below is for Viper, Clifford and Python models. Icons and
commands may differ depending on the remote brand and model purchased. Refer
to your authorized installation center for more information.
Notes
