1.
Introduction
Vigneron Specialty Products Guarantee
We guarantee our products to be free of defects in materials and workmanship. Our one-year
warranty covers the original purchaser from the date of purchase. The filler will be repaired or
replaced if, upon inspection at the factory, the filler is found to be defective in materials or
workmanship.
This warranty does not apply to damage resulting from normal wear and tear, accident, abuse,
negligence or shipping. This warranty will be rendered invalid if the customer has made repairs or
alterations to the machine without first consulting Vigneron Specialty Products.
Please keep in mind:
The volumetric filler uses a self-priming pump. Due to small flow passages and precision
components in the filler, it is important to filter your product so you do not introduce particulates
into the machine. Failure to filter your products can result in damaging your bottle filling machine.
In most cases the filler can be cleaned in the factory; however this is not a warranty repair.
2.
Set up of your filler
Tip: To get familiar with your filler, you may want to initially test it with water.
2.1
Unpack the filler from the box. Place it on a flat surface where you plan to bottle.
2.2
Connect the quick connect plug into the machine. Make sure the inline strainer is
mounted in the right direction (an arrow on the side shows the flow path). Then place the
other end of the Transfer Kit in your product.
NOTE: your product needs to be placed
below the filler to avoid differences in fill levels.
2.3
Plug the filler into a wall outlet. Turn on the Power Switch. The Digital Timer shows time
in seconds.
