Example of a door with 2 r electric strike fail close
Door contact
OUT
Address 0
Power supply 14,2V
Push button
Push button
Door contact
Electromagnetic Lock 12V/600mA max
Box Tamper
Network
IN
Address 1
Reader
Address 0
Address 1
12V/600mA max
12V/600mA max
electric
strike (fail close
)
Reader
See user manual
A
B
B
B
A
A
www.xprgroup.com
V+
V-
+
-
2
Connection example of 3 doors
1. The readers for Doors 1.0 and 2.0 must be at address 0 and
those for Doors 1.1 and 2.1 at address 1.
2. For doors equipped with 2 readers, one must be at address
0 and the other at address 1.
3. The function of OUT1 and OUT2 can be configured in the
software
4. In1 & In2: Connect to GND by a volt-free contact to activate
the input
5. LIYCY cable, twisted pair, up to 80m.
If more than 80 m. are needed, then termination resistors(120
ohm) may be required at both ends of the RS485 line, while
taking into consideration the lengths proposed on our web
site.
6. Alarm cable 2x0,22
7. The cross section of the cable depends on the current
needed by the lock
Note: The elevators relay boards (WS4-RB-12) are connected
on the same Rs485 lines as the readers.
4
6
7
5
5
3
3
6
7
6
5
5
7
6
2
2
1
1
12V battery
Example of a door with 1 electric strike fail open
Example of a door with 1 electromagnetic lock
electric
strike (fail open
)
Emergency
button
Alarm siren
or
flash siren
This product herewith complies with requirements of EMC directive 2014/30/EU.
In addition it complies with RoHS2 directive EN50581:2012