FCC and CE Radiation Norm
。
Avoid crash, hit, scrap, throw and prevent any damage to the charger and adapter
。
You may use the dry cloth to clean the charger but avoid to use with any chemical cleaning product.
。
With Smart IC intelligent chip, XPower USB charger can auto detects and maximizes compatibility when
charging. Besides, XPower USB Universal Super Charger is using built-in intelligence chip to avoid short circuit,
over charge, over heat, over current, etc. XPower purchases USD200 million 3rd party product liability insurance.
Public and Products Liability Insurance provides you with funds to pay compensation to a third party arising from
injury or damage if proved product damage form XPower product.
。
If the weather or temperature is hot, the temperature of the XPower USB charger and the charging device may be
higher than normal during charging. The temperature will be higher when put both devices together. Thus, it is
better if putting the XPower USB charger in the air circulation environment and should be avoided storing in the
handbag, on or under the bed, etc.
。
If you have any technical problem on our charger, please feel free to contact our customer service department.
This equipment has tested and found to comply with the limits for Class B digital device pursuant to Part 15 of Federal
Communications Commission (FCC) rules.
This equipment has tested and found to comply with the limits of the European Council Directive on the approximation
of law of the member states relating to electromagnetic compatibility(89/336/EEC) according to EN 55022 Class B.
FCC and CE Compliance Statement
These limits are designed to reasonable protection against frequency interference in residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may
cause harmful interference to radio communication, However, there is no guarantee that interference will not occur in television
reception, which can be determined by turning the equipment off and on. The user is encouraged to try and correct the
interference by one or more of the following measures: Reorient or relocate the receiving antenna increase the separation
between the equipment and the receiver Connect the receiver is connected to.
RoHS stands for Restriction of Hazardous Substances, and impacts the entire electronics industry and many electrical
products as well. The original RoHS, also known as Directive 2002/95/EC, originated in the European Union in 2002
and restricts the use of six hazardous materials found in electrical and electronic products. All applicable products in
the EU market since July 1, 2006 must pass RoHS compliance.
Directive 2011/65/EU was published in 2011 by the EU, which is known as RoHS-Recast or RoHS 2. RoHS 2 includes a
CE-marking directive, with RoHS compliance now being required for CE marking of products. RoHS 2 also added Categories 8
and 9, and has additional compliance recordkeeping requirements.
Double insulation
Waste Electrical and Electronic Equipment: Don’t throw in the bin
For indoor use
