English - 7
Fogging System Maintenance
Cleaning the Solution Tank
• Turn the fogging volume control to the lowest setting.
• Fill the solution tank with cold water to half of maximum capacity, close the solution
tank and shake the machine a few times. Then open the solution tank and discard the
water inside. Repeat the steps above 2 times.
• Check if the solution tank is clean. If not, you might repeat the steps above.
Cleaning the Liquid Conduit and Fogging Outlet
• Turn the fogging volume control to the lowest setting.
• Fill the solution tank with cold water to half of maximum capacity and close the
solution tank.
• Turn on the machine and turn the fogging volume control to the highest setting.
Cleaning the Surface
• Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water
directly.
• Remove dirt or any other objects that could block the air inlet, air outlet or the fogging
outlet.
Storage
• When not in use, make sure no liquids are left in the solution tank.
• Store the appliance in a dry and cool indoor place. Make sure it’s out of reach of
children.
User Maintenance and Servicing Instructions
Frequent maintenance is recommended on this appliance. Failure to follow the
maintenance instructions may cause failure of the appliance and void the warranty.
Turn off the Machine
• Turn the fogging volume control clockwise to the lowest setting.
• Turn off the machine.
•
IMPORTANT:
Discard or use up the liquids in the solution tank. If you are not able
to use up the liquids, transfer the liquids into a safe container, or follow the disposal
instructions of the liquids if applicable.
• Use proper methods of cleaning for the solution tank. (
See Page 7: Fogging System
Maintenance
)
• Maintain the battery. (
See Page 8: Battery Maintenance
)
Start Your Job (Continued)
