https://www.XPOtool.com
Artikel 34200
Seite 3
The Tool Experts
04 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
Caution!
•
The use of this device is only allowed with a fault current protection switch with a triggering
nominal current up to 30
mA (according to VDE 0100 Article 702 and 738).
•
The device is not intended for use by persons (including children) with impaired or limited phys-
ical, sensory, and mental abilities, or lack of experience and/or real knowledge, unless they are
supervised by a person responsible for their safety or follow the instructions made by this person
on how to correctly use the device.
•
Children should be supervised to ensure that they do not play with the device.
Attention!
•
The compressor head can become very hot.
Burning hazard!
•
Perform a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
•
Only use the device accordingly to the intended purpose stated in this manual.
•
You are responsible for the safety of the working zone.
•
If the cable or the plug is damaged due to external influences, the cable must not be repaired,
but must be replaced with a new one. This work can only be carried out by an electrician.
•
The voltage of 230
V AC indicated on the nameplate of the device must match the existent
mains voltage.
•
Never lift, transport, or suspend the device by its power cord.
•
Make sure that the electrical plug connection is protected from flood and moisture.
•
Before any maintenance work or adjustment, pull out the plug.
•
The user is responsible for complying with local safety and mounting regulations. Ask an elec-
trician if you have questions.
•
In case of device failure, repairs can only be carried out by an electrician.
Notes!
•
Choose the right compressor with the appropriate air volume and air pressure to match the
actual work requirements.
•
Never expose the device to dust, acid, steam, explosive or flammable gases, or weather influ-
ences (rain, sun, fog, snow).
•
The vacuum pump can only be operated in an appropriate environment (good ventilation, am-
bient tempe5
℃
–+40
℃
).
•
Never use the compressor barefoot or with wet hands or feet.
•
Never allow children to touch the switched-on compressor or to insert the plug. It may cause
burns or electric shocks.
•
Do not open or damage any part of the compressor. If necessary, contact a qualified person.
•
By opening the drain valve, the water can be evacuated. Always release the water before not
using the compressor for a long time. Store the compressor in a well-ventilated place.
•
Always wear protective goggles. Under no circumstances should you direct the airflow towards
your body or other persons’ bodies or animals.
•
Never use the compressor in areas with vapours or humidity or near bodies of water.
•
Switch off the compressor if you do not use it. Disconnect from mains before you repair, recon-
dition, maintain, clean, or replace parts. Never use the power cable as handle. Keep the cable
