XPOtool 63897, Руководство пользователя

Страница: 15 / 16

https://www.XPOtool.com Item 63897 Page 15
The Tool Experts
02 2023-1
Tank air hole clogged Clean.
Problem Possible cause Proposed solution
Engine
lacking
power
Compression ratio is
fine
Filter plate clogged Clean.
Air flows through connection Tighten.
Air led through connection of carbu-
rettor
Tighten.
Engine overheating
Switch off engine and let it cool
down. Avoid prolonged high loads
and high speeds.
Water in fuel Fill in fresh fuel.
Carbon clogging the exhaust Clean.
Engine overheating
Diluted fuel Adjust carburettor.
Cylinder covered with carbon Clean.
Poor oil
Use 2-stroke engine oil, adjust
mixing ratio.
Motor does not run properly (no noz-
zle)
Assemble machine correctly.
Knocking noises in the
engine
Poor fuel Replace.
Carbon in cylinder Clean.
Rotating parts worn and used Check and replace.
Problem Possible cause Proposed solution
Motor
stops dur-
ing opera-
tion
Engine stops suddenly
Power plug lead wire loose Have it replaced.
Piston torn Have it repaired.
Spark plug covered with carbon Clean spark plug.
Fuel used up Add fuel.
Engine stops slowly
Carburettor clogged Clean.
Tank air hole clogged Clean.
Water in fuel Fill in fresh fuel.