https://www.XPOtool.com
Item 63342, 63343, 63344, 63345, 63346, 63347
Page 4
The Tool Experts
05 2022
-1
assembling for re-use; permanently used pools are those integrated into the ground or the floor
of a building and that cannot be removed.
•
High pressure coming out of the sand filter can provoke serious damages and/or injuries when
the tank is separating. Therefore, before working on the sand filter, purge the pressure first and
thoroughly read the instructions. If the filter clamp is adjusted with the tank being under pres-
sure, the tank can separate by itself, causing serious damages and/or injuries.
•
The pump is operated with high voltage. Contact with this voltage can lead to serious injuries
and even to death. Therefore, always disconnect the device from its energy supply before work-
ing on the pump.
Functionality
•
This high-rate sand filter is designed to clean water and can be operated during many years
with little maintenance effort if installed, operated, and maintained according to these instruc-
tions.
•
This filter works with a special filtering sand (not included) that filters dirt particles from the pool
water. The filtering sand is filled into the sand tank, serving as dirt-removing media. The pool
water containing suspended dirt particles is pumped through the control valve of the filter device
to the top of the device. As the pool water is pumped through the filter sand, dirt particles are
trapped by the sand and removed from the water. The pool water cleaned like that flows from
the bottom of the device upwards through the standpipe, back to the valve at the top of the
device, and from this point through the pipes or hoses back into the pool.
•
After a certain time, the dirt particles accumulated cause a rise of resistance causing the water
flow to reduce. Then, the filter needs to be cleaned (backwashed). To do so, the control valve
is set to the “backwash” position so that the water is reversed through the filter, flowing to the
bottom of the device and from there upwards through the sand, washing the dirt and debris out
of the waste line. After backwashing, the control valve is re-set to “rinse” by hand to allow the
filter to work normally.
Technical specifications
63342
63343
63344
63345
63346
63347
Power supply
220–240
V, 50
Hz
Power
(W)
180
250
250
370
550
750
Filter diameter
(
㎜
)
250
250
330
330
400
500
Filter area
(
㎡
)
0.05
0.05
0.08
0.08
0.12
0.2
Sand tank capacity
(ℓ)
14
14
26
26
38
71
Required filter media quantity
(
㎏
)
10
10
20
20
30
65
Max. working pressure
(
㍴
)
2.4
2.4
2.4
2.4
2.4
2.4
Max. flow rate
(
ℓ
⁄
h
)
9000
10,000
10,000
13,200
18,000
20,000
Max. lifting height
(m)
7
9
9
11
13
14
Max. water temperature
(
℃
)
43
Isolation class
IPX5 (protected from water jets)
Recommended filter media
Type-20 quartz sand (0.45–0.85
mm)
