https://www.XPOtool.com
Item 63132
Page 9
The Tool Experts
07 2022-1
Troubleshooting
Problem
Possible cause
Proposed solution
Yellow/orange flames, gas smell
Burner/air inlet of burner blocked
Free inlets, clean burner.
incomplete combustion
Replace burner.
Weak flames despite highest
possible power adjustment
Gas flow too weak
Re-establish correct gas hose
laying without kinks or bends.
Burner/air inlet of burner blocked
Free inlets, clean burner
Gas pressure too weak
Completely open gas cylinder
valve, check gas cylinder, check
content of gas cylinder.
Darting flames
Temperature too high
Reduce temperature.
Grease accumulated in collecting
tray burns
Empty/clean collecting tray.
Flame break
Wind too strong
Go to area with weaker wind.
Flame kickback
Burner connection blocked
Free or clean burner connection.
Gas escapes on or near the gas
cylinder
Connection error of pressure re-
ducer,
loose connection of pressure re-
ducer
defective/worn joint
(Close the gas valve) Remove
pressure reducer, check condi-
tion of joint, replace if necessary;
carefully connect pressure re-
ducer, ensure that it is correctly
closed.
Flames do not spread to other
burners
Distributor blocked (mostly due
to leftover food or fat residues)
Clean and brush out distributor
pipe.
Environment and disposal
•
Recycle the packaging material.
•
The gas cooker itself must not be disposed of with normal household waste. Disposal may only
be carried out by approved waste disposal companies or a communal waste disposal facility.
Please observe all applicable regulations and contact the local authority if necessary.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
