XPOtool 62883, Руководство по эксплуатации

Страница: 6 / 10

© by WilTec Wildanger Technik GmbH Article 62883, 62884 Page 6
http://www.WilTec.de
http://www.aoyue.eu 01 2022 -1
http://www.teichtip.de
Trigger operation
Caution! Before plugging in the mains plug, make
sure that the power button is in the “OFF” position
and that the trigger can be reset smoothly.
Start and stop: Pull the trigger (2) to start the unit.
Release the trigger completely to stop the unit. If
you want to use the locking switch, you only need
to press the self-locking button
(1) as soon as you
pull the trigger of the unit. The unit will then run
continuously. Release the trigger completely to
stop the unit.
Speed adjustment
The speed switch (1) can be set from level “1” to
“6”. You can set different rotation speeds from low
to high according to the requirements of the differ-
ent jobs to be done.
Efficient and safe operation
Caution! Make sure that the power supply is dis-
connected when you place the tool on the work
surface and never put the polishing wheel down
until it stops completely.
Hold the tool firmly and turn on the switch. Then
move the polishing wheel at an angle of 15
de-
grees to the surface of the workpiece; move it only
with light pressure. Excessive pressure will affect
the quality of the work and wear the polishing
wheel.