https://www.XPOtool.com
Item 62850
Page 8
The Tool Experts
05 2022-1
7.
Tilt the tool as depicted above to bring the blade into a vertical position. When cutting, start out
using minimal force to create a groove. Once a groove has been created, allow the rest of the
blade to cut into the workpiece. Doing this will prevent blade from moving from side-to-side
during the cutting process.
Caution!
Do not apply force to the tool by pressing too hard with your hands or leaning into it. The
weight of the tool itself creates enough force to make a clean cut. Forcing the tool or applying pressure
by leaning onto it may cause the blade to twist or break, damaging the saw as well as its environment
and possibly causing injury. As you reach the end of your workpiece, finish off the cut by slightly raising
the unit slowly to bring the blade up.
Maintenance/service
•
Protect the tool from impact, shock, and grease.
•
Always keep tool and cord clean (especially the ventilation slots).
•
Turn the tool off properly and disconnect it from its power source before cleaning.
•
Do not attempt to clean ventilation slots by inserting pointed objects through openings.
Technical specification
Voltage
(V)
220–240
Frequency
(
㎐
)
50
Power
(W)
1100
Saw blade speed
(
㎧
)
0,7–2,4
Cutting capacity
(
㎜
)
127
Protection class
II