https://www.XPOtool.com
Item 62808
Page 6
The Tool Experts
12 2022-1
Adjustment of the inclination angle (four levels)
•
For normal use, the bench top is set to a horizontal position; however, the top can also be
adjusted to 25°, 50°, and 80°.
•
Make sure that the inclination adjustment knobs are completely unscrewed.
•
Push the two adjustment knobs in simultaneously and tilt the bench top until the knobs engage
into the next set of pre-set guide holes
(Fig.
5).
•
Turn the inclination adjustment knobs clockwise to tighten the bench top and hold the desired
position.
Note!
Make sure that the inclination adjustment knobs are tight before using the work bench.
Use the pre-set guide holes only.
Bench top adjustment
•
To adjust the bench top, pull up both levers on each sliding bar and slide forwards or backwards
as desired
(Fig.
6).
•
Make sure that the mechanism is securely engaged in the holes in both sliding bars.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.