Safety during use and maintenance
Use clamps (not included) or other aids to secure and support the workpiece on a stable plat-
form. If the workpiece is held by hand or pressed against the body, it becomes unstable and
can cause loss of control.
Use the right tool for the job. The right tool works better and more safely when used at the
speed which it is designed for.
Do not use the tool if it cannot be switched on or off using the throttle lever
(20).
Disconnect the device from the air supply before performing maintenance work, changing the
inlet or storing the tool. This preventive safety measure reduces the risk of the tool being acci-
dentally put into operation.
Store unused tools out of the reach of children and other untrained people. This device is dan-
gerous in the hands of inexperienced users. Never let children come into contact with this
product.
Maintain the tools with care. Keep the device clean. Properly maintained tools are less likely to
get stuck and are easier to control. Do not use a damaged tool and also make sure that no
one else is using the tool if it is damaged.
Check for any moving parts misaligned, jammed or broken, or for any other condition that
could affect the operation of the tool. If the device is damaged, have it serviced by a profes -
sional before using it again. Many accidents are caused by poorly maintained tools.
Safety during repair
Tool repairs may only be carried out by qualified repair personnel. Maintenance work carried
out by unqualified personnel can result in injuries.
Only use identical spare parts when servicing a tool. Follow the instructions in the “Inspec -
tion, maintenance, and cleaning” section of this manual. The use of unapproved parts or fail-
ure to follow the maintenance instructions could result in damage to your workpiece and/or
personal injury.
Air supply mounting instructions
Warning!
Make sure that the throttle trigger
(20)
of the tool is switched off and the tool is disconnected
from the air supply before making any adjustments.
Fig. 1
№
Name
№
Name
1
Tool
6
Filter
2
Hose line
7
Air hose rolled up
3
Female thread (¼”)
8
Regulator
4
Air valve
9
Air compressor
5
Oiler
https://www.XPOtool.com
Item 62797
Page 4
The Tool Experts
04 2021
-1