https://www.XPOtool.com
Item 61917
Page 4
The Tool Experts
05 2022-1
•
Any maintenance operations, except of those specifically described within this manual, must
only be carried out by the manufacturer or an authorised service partner.
Equipment
The mobile belt saw is supplied ready to use, packed in a cardboard box, and protected by a sheet of
cardboard. The packaging material must be disposed of according to current environmental protection
regulations. The machine is initially supplied with the instruction manual.
Note:
•
The belt saw has been designed and manufactured for bench use. The metal parts being cut
may have a maximum diameter or thickness of 105
mm.
•
Any other use is excluded by the manufacturer who shall be exempt from any liability for damage
to people, animals, or the machine itself caused by improper use.
•
Do not run the machine for a longer period when no parts must be cut.
•
Do not cut hardened or cemented steel parts.
Machine
Identification
•
The essential information for identifying the product includes:
◦
Manufacturer,
◦
Serial number,
◦
Model,
◦
Year of manufacture,
◦
Voltage (V),
◦
Power (kW),
◦
Frequency (
㎐
),
◦
Amperage (A),
◦
Weight (
㎏
).
•
The EC approval plate is located as shown in fig.
2, ref.
A. It is strictly forbidden to remove or
damage the plates. Immediately contact the manufacturer or an authorised service partner if
this should happen.
•
For any information and/or technical explanations regarding the machine, always indicate:
◦
Model,
◦
Serial number,
◦
Item number (of seller),
◦
Order number.
Description
•
The portable bench saw consists of a fixed bench, pivoting head (including a screw lock for
angle sawing), speed regulator, piece clamp, and operator tool.
•
The machine may be used for dry cutting (from 0° to 45° left) of materials compatible with the
specifications listed below always in compliance with environmental conditions and limitations
recommended by the manufacturer as well as current health and safety regulations.
CAUTION:
The description specifies the use for which this product has been designed and built. Any
other use or failure to comply with the technical parameters listed below may lead to hazardous situation
including the risk of injury to people and property.
