https://www.XPOtool.com
Item 61017
Page 3
The Tool Experts
04 2022
-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Operating and safety notes
•
Before commissioning the compressor, it is necessary to read the operating manual thoroughly.
•
The compressor should be placed in a dry and aired room. Keep the device away from flamma-
ble objects and chemicals.
•
The time of non-use should not exceed two years. If the time of non-use is longer, the compres-
sor should be turned on approximately every 4
weeks for approximately 15
min.
•
Before using the compressor, it is necessary to carry out the required maintenance works and
check-ups.
•
Drops and shocks should be avoided. The compressor needs to stand on a stable and even
ground. It must not stand sloped during transport or use.
•
Make sure that all open connections are closed with protective caps during transport to avoid
pollutants and water from entering.
•
To ensure a good performance, the compressor should stand in an aired, clean, and cool area.
Dusty or dirty air as well as high temperatures in the surrounding need to be avoided.
•
Make sure that the compressor is switched off before connecting it to the electricity. After con-
necting it, it can be switched on. The voltage must not exceed or fall below the nominal voltage
by more than 10
%.
•
The air compressor must not get wet. To avoid damages, it must not be placed in a wet area.
•
Do not touch any hot components such as cylinder head, exhaust pipe, and check valve to avoid
burns.
•
The electrical cable needs to comply with the power requirement. The cable must not be too
long, otherwise it affects the starting procedure and the performance of the air compressor.
•
Do not store the compressor outside and protect it from direct sun light.
Warning:
Disconnect the power supply and drain the system before attempting to install, transport,
or service it! Follow all local electrical and safety regulations!
Caution:
Never use an extension cord with this product. Use an additional air hose instead of an
extension cord to avoid outages and permanent engine damage. The use of an extension cord will void
the warranty.
Technical data
Power
(W)
750
Electricity supply
230
V ~ 50
Hz
Rated speed
(
r
⁄
min
)
1415
Flow rate
(
ℓ
⁄
min
)
98
Max. working pressure
(
㍴
)
8 (115
psi)
Tank capacity
(ℓ)
24
Net weight
(
㎏
)
20