https://www.naturewater.eu
Item 60006–60008, 61744, 61754, 61760
Page 4
The Tool Experts
09 2022-1
Assembly instructions
Choose a suitable location to place your mailbox system. Make sure that the surface is level and that
you can anchor the frame firmly with the floor screws. We recommend that you assemble the mailbox
close to where it is to be installed.
•
Push the ring covers
(7)
onto the frame rods
(2).
Check that the ring is pointing in the correct
direction (see fig.
1).
•
Connect the frame
(2)
and the cross bars
(3)
using the screws
(9).
Leave the assembly loose
and do not fully tighten the screws yet.
•
Place the frame in the location that you have chosen and mark the mounting holes for the in-
tended location (lift the ring covers to do this).
•
Set the bracket aside and drill holes at the marked locations. Then you can attach the frame
(2)
with the floor screws
(8).
Then connect the mailbox unit
(1)
to each other using the screws
(11).
•
Now attach the mailboxes
(1)
with the spacers
(6)
between the bars of the frame
(2).
Use the
spacer screws
(10)
for this.
•
Now tighten all the screws and finally attach the name tags
(5)
to the desired locations.
Figure 1
Technical specifications
60006
60007
60008
61744
61754
61760
Total dimen-
sions
(
㎜
)
585 × 270 × 385
Dimensions of
foot
(
㎜
)
1500 ×
⌀
50
1500 ×
⌀
50
1500 ×
⌀
50
1500 ×
⌀
50
1500 ×
⌀
50
1500 ×
⌀
50
Number of in-
dividual boxes
5
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
