https://www.XPOtool.com
Item 51727, 51257, 51728, 51973
Page 3
The Tool Experts
08 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions/warnings
The owner and/or user must have read and understood the operating instructions of the device before
using it. Installed personnel should be cautious, competent, trained, and qualified in the safe handling
of the working equipment used when working with the shop press. Warnings should be read and under-
stood.
•
Be familiar with the application control, application process, and warnings.
•
Ensure that all connectors are secure.
•
Make sure you know the contents of the instructions for use.
•
This device is not intended to be used by persons (or even children) with reduced physical,
sensory, or mental abilities or persons who do not have the appropriate experience or
knowledge, unless they are observed by a person responsible for their safety or have previously
been instructed to use the equipment by such person.
•
Children must be supervised to ensure that they do not play with the appliance.
•
Stay concentrated and do not allow any distraction during the process.
•
Do not use welding equipment near the support.
•
Always pay attention to the optimal lighting of the workplace.
•
Be sure to wear solid footwear.
•
Use a hairnet for long hair.
•
Wear tight clothing.
•
Take off jewellery (rings, earrings, watches, etc.).
•
Be careful not to wear loose straps or belts.
•
Long working in a standing position can lead to dizziness. Make regular breaks and drink
enough.
•
Never open the screw connections under pressure/load.
•
Set the press to the lowest position when refilling hydraulic oil. Only use high-quality hydraulic
oil,
NEVER
use other fluids such as alcohol, glycerine, detergent, engine oil, water, contami-
nated oil, or other inappropriate fluids.
•
The hydraulic cylinder is under pressure and must not be opened by force.
Control/inspection
•
Prior to commissioning the shop press, visual inspection must be carried out to detect leaks,
damage, loose, or missing and worn parts. Check the oil level regularly. Set the press to the
lowest position when refilling hydraulic oil. Remove the cap; the oil level must reach exactly to
the opening. If necessary, refill with high-quality hydraulic oil. Perform a complete oil change
every year.
•
Regularly apply lubricating liquid to all mobile parts. Regularly check the piston for rust, cracks,
and corrosion. Clean these spots with an oily cloth.
•
If it should be necessary to scrap the press, the oil should be purged and disposed of properly,
the rest of the press should be recycled.
