https://www.XPOtool.com
Item 51722
Page 3
The Tool Experts
08 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Technical data
Maximum pressure
(bar)
25
Stroke
(
㎜
)
35
Rate of water suction per stroke
(mℓ)
13
Water tank capacity
(ℓ)
5
Weight
(
㎏
)
2
Dimensions
(
㎜
)
305 × 185 × 110
Accessories
1 × pressure hose
1 × ½
″
hose bushing
Testing procedure
1. Install the stop valves
(5 and 1)
to the test pipe
(2).
2. Fill up the test pipe with water.
3. When the test pipe is filled with water, remove the air and re-close the valve 2
(1).
4. Connect the tester and the test pipe with the attached pressure-resistant hose assembly.
5. Fill the tester water tank with water and operate the pump.
6. Open the stop valve 1
(5)
of the test pipe and continue the operation to fill up with water.
7. When the pressure gauge equipped to the tester rises to the required pressure, stop operating
the pump.
8. If the pressure does not drop, the test pipe is close.
9. If the pressure does drop, there is a leakage somewhere on the test pipe.
№
Name
№
Name
1
Stop valve 2 (air vent)*
4
Pressure-resistant hose
2
Test pipe
5
Stop valve 1*
3
Pressure gauge
* Stop valves 1 and 2 are not included in accessories.
( )
( )
( )
( )
( )
