https://www.XPOtool.com
Item 50800, 51157
Page 3
The Tool Experts
08 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Attention!
Before lifting an object, make sure you are fully aware on how the jack works. The
inadequate use can cause serious injury. All other uses than the ones outlined here can damage the
device and can be dangerous.
Safety requirements
•
Only use the lawn mower jack for lifting.
•
Do not allow children to use or play with the device.
•
At no time leave the mower jack unattended and keep children and by-standers away.
•
Never overcharge the mower jack. Overcharging may damage the mower jack and/or cause a
defect, resulting in serious injury.
•
The mower lift is designed for a flat and hard ground. Using it on a soft surface can cause
instability, making the whole construct fall over.
•
Always secure the load on the lateral reinforcement located on the side opposite the hand crank.
The load should always be placed horizontally on the mower jack to avoid damage and sliding
or falling of the load.
•
Always visually check the jack before use, without any objects on it.
•
Before lifting a ride-on mower, make sure that the driver has left the seat.
Use
Assembly before use
1.
Position the jack on a flat and stable surface.
2.
Expand the steel rod and secure it with three screws.
3.
Install the handle and tighten it by screwing it on.
4.
Remove the locking peg.
5.
Place the crankshaft upwards.
6.
For a better use we recommend to grease the shaft before use. This should be repeated when
required to ensure the smooth functioning of the parts.
Assembly during use
1.
Remove the locking bracket
(1)
to be able to lift the crankshaft into an upright position
(2).
2.
Then place the locking bracket back into place, allowing the crankshaft to be sturdily positioned
upright
(3).
3.
Then turn the hand crank clockwise enabling for the lawn mower to be lifted
(4).
