https://www.XPOtool.com
Item 34138
Page 4
The Tool Experts
04 2022-1
5.
By pressing the trigger, the air will begin to flow. Slowly pull the trigger backwards to achieve
atomising of the paint.
6.
The spray pattern depends on the distance between the spray nozzle and surface.
•
Slow movements are recommended for small amounts of paint, fast movements for large
amounts of paint.
•
Do not spray arc-shaped patterns and do not pause spraying, as otherwise the paint will not
be spread regularly.
•
To apply fine lines, remove the needle cover and bring the gun close to the surface.
•
Make sure that the distance between the gun and surface stays constant.
•
The paint jet and paint pattern are adjusted by turning the fine paint nozzle at the front part.
•
The paint nozzle is completely closed when being screwed in clockwise up to the stop. Turn
the paint nozzle anti-clockwise with your thumb and forefinger for adjust different levels. The
maximum flow rate is reached after 4 half anti-clockwise turns.
7.
Switch off the compressed-air supply and let the pressure off as soon as you do not use the gun
any longer.
8.
Empty the paint cup after work. Drain the paint rests into an appropriate container and dispose
of it properly.
Cleaning and maintenance
•
Empty the paint cup and clean it out with water or dissolvent.
•
Fill water or dissolvent into the pain cup, then keep the needle holder shut by hand and spray.
Thus, the air will flow backwards into the nozzle, removing all paint rests.
•
It is advisable to spray again without keeping the needle holder shut to allow fresh dissolvent to
come into the paint conduct; then re-wash the dissolvent by keeping the needle cover shut by
hand. Repeat this several times if necessary.
•
Clean all components thoroughly to avoid any deposit.
Technical specifications
Nozzle diameter
(
㎜
)
0.8
Paint cup capacity
(mℓ)
2 × 20
Size
(
㎜
)
230 × 146 × 46
Max. working pressure
(
㍴
)
3.4
Weight
(
㎏
)
0.5
