https://www.XPOtool.com
Item 30206
Page 3
The Tool Experts
05 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•
Warning!
Read all safety instructions making sure that you understand them before using this
device. Non-compliance with these instructions might lead to serious damages and injuries and
void the warranty.
•
Attention!
To avoid injuries, wear certified protective glasses during use.
•
To avoid damages to the tool, do not use any electric tool or tube extensions together with this
tool. Only tighten by hand.
•
To ensure a long service life, clean and lubricate the threads before every use. It might be
necessary to grind the riveting head if you wish to use it for 520-chains or larger ones.
•
Warning!
The warnings, information, and instructions of this manual cannot cover all possible
conditions and situations. Therefore, thoroughly read the manual, making sure to understand
everything comprised therein. Always use to tool and its components with caution and foresight.
Separation of a chain
№
Name
№
Name
1
Lever
4
Guides
2
Pressure bolt
5
Breaking tip
3
Centre bolt
1.
Start with assembling the tool, screw the centre bolt into the C frame.
2.
Choose the breaking tip best suitable for the application.
3.
Insert the breaking tip chosen into the spring and slide both into the centre bolt.
4.
Turn the threaded pressure bolt into the centre bolt above the tip.
5.
Position the tool above the chain, ensuring that the breaking tip is above the chain pin.
6.
Tighten the pressure screw by hand, using the slide handle or a 14
mm wrench.
7.
Press the chain bolt all out of the chain and through the C-frame hole.
