Xplova X5, Руководство пользователя, Страница: 24 / 101

24
GPS Setting
___________________________________________________________________________________________________________________________
1. Enter Quick Access Menu. Tap
to enter the GPS satellites
settings. Tap the [ON/OFF] button
to enable/disable the GPS
function. The satellite number
and signal strength will be shown
on this page. After GPS is turned
on, the GPS icon will appear on
the Status Bar.
2. The number on the screen
indicates the satellite number. If
the color displayed in grey, this
indicates weak signal. If the color
of the satellite number is
displayed with deep orange -
yellow
– green:

green indicates good signal

yellow indicates medium
signal

orange indicates acceptable
signal
The signal strength can also be
determined by the length of the
column below. If the signal is too
weak to be determined, then it will
be displayed with a light color bar.
3. Reset GPS: In case of abnormal
positioning that takes too long
and is still unable to locate, such
as unable to locate at an open
area for more than five minutes,
tap [Reset GPS] to search for a
signal again.
4. Locating Completion Confirmed:
After GPS is located and you are
in Navigation mode, your current
location can be seen on the map
by a green dot. Alternatively, you
can tap [Positioning] button
on the bottom left and the map
will immediately move to your
current location and display it on
the map. At this time, the color of
the positioning icon will turn blue.