3. X2 is able to connect to: (1) Speed sensor, (2) Heart rate monitor, (3) Cadence
sensor, (4) Speed/cadence sensor, (5) Power meter, (6) Smart trainer etc.
4. During the operation, press the left down button to return to previous page.
5
Start Riding
5.1
GPS Signal
The X2 will automatically search for satellites after it is turned on. Please be in an
outdoor environment with no shelter above. The first GPS search will take 30
seconds to 3 minutes. Stagnant status can help shorten the GPS search time.
You can confirm the current signal strength on the GPS symbol in the upper left
corner of the X2 screen.
5.2
Start recording
Press the lower right button to enter the [Riding] mode. After GPS positioning,
you can press the lower right button to start riding. During riding, there will be a
symbol in the upper left corner of the X2 screen.
During riding, you can press the right side buttons to switch between the ride
data page, altimeter, and route guide page.
Note: When the route guide function is not used during riding, the route guide
page will display your current riding track.
