XPLORE
HUB
|
EASY SETUP GUIDE
2
•
Hub 5
Hub 5
Hub 5
*
Setting Up Your Hub 5
Step 1:
Connect your
new Hub to your Modem
Plug one end of the RED
ethernet cable into the
LAN port on your Modem
and the other to the RED
WAN port on the new
Xplore Hub
Modem appearance may vary
Step 2:
Power up your Hub
•
Connect the Hub Power
Cable to the power port
on the Hub and then plug
the other end of the cable
into a 120-volt wall outlet.
•
The Power LED light at the
front of the Hub should
turn into solid green.
•
The Broadband LED light
should also turn-on.
If the light doesn’t turn on,
please check the connection
between the WAN port at
the back of the router and
the modem
Step 3:
Check Your Internet
Connection
Before you connect to your
Hub, check the Internet
LED light at the front of the
Hub. It should be solid green
To Connect by Cable:
Connect your computer or
other device to your Router by connecting one end of the Yellow
Ethernet Cable to your selected device and the other end to one of
the Yellow LAN ports on the back of your Router.
