19
“For kids who like to move!”
Position 2
DYNAMIC FOOTBED ADJUSTMENT
1. To adjust height of Dynamic footbed, loosen screw on limiting collar
as shown in figure 45 using a 3/16in hex wrench, then slide the limit-
ing collar up or down as desired (fig. 46). Re-tighten the screw.
2. To swap position of the shoe holder, unscrew both bolts in the bottom
of the shoe holder (fig. 47.1). Remove, shoe holder, and align screws
to either position 1 or position 2, (fig. 47.2) then tighten bolts until the
head of the bolt is flush with the surface of the shoe holder (fig. 47.1)
K. FOOTBED ADJUSTMENT (continued)
Figure 45
Figure 46
Dynamic Footbed
Position 1
Figure 47.2
Figure 47.1
L. BASIC PLANAR HEAD SUPPORT
To attach the Basic Planar Head Support:
1. Wrap the end of head support that has hook and
loop fastener around a seat back tube and fasten
the hook and loop together (fig. 48.1)
2. Clip buckles together as shown in figure 48.2.
3. Tighten webbing as desired as shown in figure
48.3.
NOTE: by tightening or loosening either strap, one can
achieve varying levels of stiffness or “cradling” as de-
sired.
Figure 48.1
Figure 48.2
Figure 48.3
