XPG PYLON 450 BRONZE Скачать руководство пользователя страница 8

Страница: 8 / 68

INSTALLING YOUR NEW PYLON POWER SUPPLY

1.  Remove the power supply from its packaging.
2.  Install the PSU into the case with the four screws provided.
3.  Connect the 24pin ATX cable to the motherboard 24pin power socket.
4.  Connect the EPS 12V 8 / 4+4pin cable to the CPU power socket.
5.  Connect SATA power cables to any devices that may use 4-pin peripheral connectors, i.e. hard drives, solid state

drives, optical drives.

6. Connect the corresponding PCI-E connector as instructed by your graphic card’s user manual, if your graphic card

requires additional PCI-E power.

Please note that the power supply utilizes a 6+2pin PCI-E connector that can be effectively used either as a single

8pin or a 6pin PCI-E connector.

To use it as a 6pin PCI-E connector, please detach the 2pin connector portion from the

connector header.

7. Connect the peripheral/ﬂoppy disk 4pin connector for fans, pumps, legacy components and other devices/adaptors.

8. Connect the AC Power cord to both your power supply and to the wall.
Check all connections to ensure that every item is properly plugged in and turn the power switch of the power supply

to the ON position.

Make sure that your system is turned off and unplugged before you start installing it.
Disconnect the AC power cord from your old power supply if any.

TROUBLESHOOTING

1. Please make sure the AC main power cord is connected to your PC correctly and that your power outlet is properly

emitting power.

2. Please make sure the AC On/Off switch on the back panel of the power supply unit in the “I” (On) position.
3. Please make sure that the MB& CPU Power Socket & connectors are connected correctly on the motherboard.
4. If you still have problem turning on your PC, please contact ADATA Tech Support, Service Center or your local dealer.

If your system does not turn on after installing the power supply, please follow the
troubleshooting guide listed below:

DURATION OF WARRANTY

ADATA Technology Co., Ltd. provides a 3 years warranty period for this product unless
regional laws and regulations state otherwise.

1.  The warranty label is altered, damaged or missing.
2.  Product serial number does not conform to our original system.
3.  Product was purchased from an unauthorized agent.
4.  Damage caused by natural calamity
5.  Any abuse outside the intended product operation.

LIMITATION OF WARRANTY

This limited warranty covers only repairs or replacements of products manufactured by
ADATA Technology Co. Ltd. and its authorized partners.
Please note that ADATA is responsible for providing free repairs except for the following
reasons:

ONLINE CUSTOMER SERVICE

For frequently askeatd questions, additional information and service instruction please visit
our product page www.xpg.com

IMPORTANT SAFETY INFORMATION

1. NEVER, under any circumstances, open the power supply unit or attempt to repair it by yourself. This is extremely

dangerous due to the high voltage components inside.

2. DO NOT insert any object into the fan grill or the ventilation area of the power supply unit.
3. DO NOT place any object in front of the fan or the ventilation area of the power supply unit that may obstruct or

restrict airﬂow.

4. USE the included cable with the power supply unit. or as purchased from XPG. DO NOT use any third party cables

or extension cables with this unit.

5. Avoid dust, humidity, and temperature extremes. Do not place the power supply unit in any area where it may

become wet.

6. The power supply unit is for integration into a computer, and not intended for external or outdoor usage.
7. Failure to comply with any manufacturer instructions and/or any of these safety instructions may result void

warranties and guarantees.

Agency

FCC (IC)

EAC

CCC

TUV

cTUVus

TUV-S

RCM

NOM

BSMI

ROHS 2.0