background image

10

Do’s and Don’ts

Do read the entire instruction leaflet before commencing installation.

• 

Do install the transformer with a double pole isolating switch.

Do make sure that the mains supply is switched off before attempting to make electrical connections or 
carry out any maintenance or cleaning.

Guarantee.

Customers outside UK – see International below.

UK. The Ventilator is guaranteed against defects for 3 years from the date of purchase.

Please keep your purchase receipt.

If you have any problems, contact Xpelair’s Head Office at the address shown below.

Technical advice and service.

Customers outside UK – see International below.

UK: Xpelair have a comprehensive range of services including:

Free technical advice from Engineers on all aspects of ventilation.

Free design service, quotations and site surveys.

Service and maintenance contracts to suit all requirements.

Please ask for details:

• 

By telephone on Techline:
+44(0) 8709 000430

• 

By Fax on Techfax:
+44(0) 8709 000530

• 

At the address below.

Head Office, UK sales office and spares.

GDA Applied Energy Ltd, Morley Way, Peterborough, PE2 9JJ, England

Telephone: 

+44 (0) 1733 456789

Fax: 

+44 (0) 01733 310606

Sales Hotline: 

+44 (0) 8709 000420

http:\\www.xpelair.co.uk

International

Guarantee: Contact your local distributor or Xpelair direct for details.

Technical Advice & Service: Contact your local Xpelair distributor.

Eclipse - Oxplaire  12/4/00  6:52 pm  Page 10

Содержание XHR150PC











Отзывы: