Xpelair Xcell 400 QV страница 4 Скачать руководство пользователя

Страница: 4 / 43

1 General Information

Read all these instructions & warnings fully before commencing installation.

These installation and operating instructions must be observed during installation, operation, service and

maintenance. This MVHR should only be installed and repaired by a qualified service technician. Improper repairs

may expose the user to considerable danger. Under current regulations, the installation and operating instructions

must be accessible at all times and must be handed to the technician for reference whenever work is being done on

the MVHR. When moving out of the premises this MVHR has been installed in, please pass the instructions on to the

next tenant / owner. Unpack the MVHR carefully and check for any visible signs of damage. If any damage is found

contact the supplier. Only use original spares in order to avoid secondary damage. Please ensure that all packaging

materials are disposed of properly in accordance with current environmental requirements.

2 Components and Materials of Construction

The MVHR comprises of the following main components:

Item

Description

Outer casing:

Powder-coated stainless steel, colour white to RAL 9010.

Access hatch:

PS plastic.

Ducting spigots, Ø 150mm: EPP, black.
Internal air paths and

internal casing:

EPP, black.

Filters:

G4 Filters fitted as standard. An external Air Filter Box with F5 or F7 Filters is also

available as a separate accessory.

Heat Exchanger:

The Heat Exchanger is made from fully recyclable PS plastic. The Heat Exchanger

integrated into the MVHR is based on the counter flow principle with triangular air

ducts for supply and exhaust air.

Fans:

Energy-saving EC DC Fans with optimal efficiency.

Содержание Xcell 400 QV












































Результаты поиска

Содержание Xcell 400 QV

Отзывы:

Похожие инструкции для Xcell 400 QV

Бренды по названию

Популярные бренды

Xpelair Xcell 400 QV, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Xcell 400 QV

Отзывы:

Похожие инструкции для Xcell 400 QV

Бренды по названию

Популярные бренды