12
C O N T R O L S
FREQ.
SHIFT._____________________________
The FREQ. SHIFT switch eliminates interference
which would otherwise be caused between two
XP detectors used within close proximity of each
other.
It can act on two settings simultaneously:
the working frequency of your detector:
9
Freq1 ou Freq 2
The XP wireless headphone output channel:
9
CH1 ou CH2
How to use the FREQ. SHIFT. switch.
If you are working ALONE without your XP wireless headphones:
it is better to use FREQ. SHIFT.
9
on the middle setting: DETECT Freq1 / WS1 OFF position
The wireless headphone output will be switched off and therefore not use
up power. The detector will be set on frequency 1.
If you are working ALONE with your XP wireless headphones:
you can use FREQ. SHIFT.
9
on a low setting: DETECT Freq 1 / WS1 CH2 position
9
on a high setting: DETECT Freq 2 / WS1 CH1 position
You should also consider adjusting the input channel of the wireless
headphones on the earpiece. Simultaneously hold down the ± buttons for
five seconds. See the wireless l headphones user manual for more
information.
5
