EN
21
Main menu
Setting
Meaning
4:3 Pan&Scan
For 4/3 TV. Contents deviating from the aspect ratio are displayed in full-screen
format if possible, undistorted, but with loss of information.
4:3 Letterbox
For 4/3 TV. Contents deviating from the aspect ratio are displayed undistorted
but possibly with "black bars".
16:9 PillarBox
For 16/9 TV. Contents deviating from the aspect ratio are displayed undistorted
but possibly with "black bars".
16:9 Pan&Scan
For 16/9 TV. 16/9 transmissions are displayed full-screen and undistorted. 4/3
transmissions are displayed undistorted but enlarged. This setting is particular-
ly suitable for 4/3 "letterbox" transmissions to reduce the display of "black bars"
in this case.
Picture/HDMI resolution
Here you define the resolution that is output via the HDMI output.
Note:
•
Please also refer to the manual of your TV.
•
This setting is only active when an external TV is connected via HDMI.
Channel search/automatic scan
When this option is activated, the automatic scan starts. See page 13.
Channel scan/manual scan
You can search for specific channels. To do this, you must know the technical parameters (frequency
or channel). The bar display at the bottom of the screen indicates whether a signal can be found with
the set parameters. You can also use the bar display to align your antenna. Start the manual channel
scan with the
OK
key.
Channel scan/country
Select the country in which you use the TV.
Channel scan/Antenna Power
If your antenna (e.g. an indoor antenna with amplifier without
its own power supply) must be supplied with power from the
TV via the antenna cable, please enable this function.
Channel scan/Filter Internet Service
When this function is enabled, the TV will not store internet
channels during the channel scan.
Note:
•
The TV cannot be connected to the internet and there-
fore cannot display internet channels.
•
This function is not supported by all DVB platform
operators.
