MPB 500
5
En
g
lis
h
MPB 500 Indicator lnstructions
Connect to your electronic device once to trigger the LED indicators and reveal
the remaining power state. The number of lit LED indicators reflects the
remaining power state:
. The LED lights will turn off when the device is fully charged.
. The LED lights will light for 10 seconds when it starts to charge another device.
The LED lights will remain unlit when the battery is empty.
1. To protect the long-term capacity of your device's battery, we recommend you
unplug the power wire promptly after the device is fully charged.
2. During the charging process, the MPB 500 will consume about 30% of total
capacity, including power loss from circurt heat and voltage conversion.
3. Since the combined output of both po.s is limited to 2A, concurrent use of the
two pods will make the charg.ng speed twice as slow,
4. Many mobile internet devices such as the iPad charge at 2A. Please refer to
your device's manual to identify the ideal Amps / charging port.
5. The optional film on the mirrored front surface is provided to protect your
device from scratches. Feel free to peel it off according to your preference.
If the MPB 500 fails to charge:
Check that the adapter connection is secure.
If the MPB 500 fails to charge other eleatronic devices:
A. Check that the connection between the MPB 500 and the electronic device is
secure.
B. Check that the MPB 500 still holds a charge, and recharge when remaining
power is low.
C Check that the MPB 500 voltage is compatible wíth the electronic device's
required charge.
Note
FAQ & Solution
Содержание MPB 500
Страница 1: ...OPERATION MANUAL ENG...
