12
HTL 2335HD
Engl
ish
1. Connect the stand in order to the instruction on the previous page.
2. Connect the aerial or input source to the appropriate input socket at the rear of the set.
3. Connect the small round plug on the power adaptor cable to the power input socket at the rear of
the set.
4. Connect the main cable between the power adapter and the main supply. The LED will show a
red light.
5. Switch the power on by pressing the
POWER
button on the front panel or the remote control. The
LED will show a green light.
6. Use the
INPUT
button on the front panel or the remote control and a popup window with the
INPUT
appears on the screen. You can select following sources: DTV, ATV, YPBPR, AV,
SCART, VGA, HDMI or Media Player. You can use the front panel control to adjust the volume or
select a channel, as shown below, or you may use the remote control and confirm by
OK
button.
A. Analog TV tuner (for example: cable system
)
After switched on and press the
INPUT
button and choose “ATV” by pressing the
navigation button
UP/DOWN
and confirm by the
OK
button. Now the TV set is in
ATV
Mode. By the first using of the TV set, the systems starts automatically the menu for
searching the TV channels (please refer page 21).
B. DVB-T mode:
Switch on the unit and press the
INPUT
button and choose “DTV” by pressing the
navigation button
UP/DOWN
and confirm by the
OK
button. Now the TV set is in DVB-T
mode. By the first using of the TV set, the systems starts automatically the menu for
searching the TV channels (please refer page 21).
C. Media Player mode:
Switch on the unit and press the
INPUT
button and choose “Media Player” by pressing the
navigation button
UP/DOWN
and confirm by the
OK
button. Now the TV set is in Media
Player and appears the browser on the screen.
7. To switch the set off a short time, press the
POWER
button, the set will go into stand-by and the
LED
will show red . lf you are not going to use the set for some time, switch the power off
completely by unplugging the mains cable.
Quick Start Guide
