ENG
7
Remote Control
Learning function
The buttons in the TV CONTROL section (except the
SET
button) can learn button functions from oth-
er remote controls. This means that you can copy important key functions from your TV remote control
to the receiver remote control and only need one remote control to watch TV with the receiver.
1. Press and hold the
SET
button for about 3 seconds until the red
light becomes brighter. The remote control has entered program-
ming mode.
2. Press the button for the function to be programmed, the light will
flash.
3. Take the TV remote control and point it at the remote control unit at
a distance of 3 to 5 cm.
4. Press the button of the function to be programmed. If the program-
ming was successful, the light will flash 3 times.
5. Repeat the programming for all the buttons in the TV CONTROL
section.
6. Press the
SET
button to finish programming, the red light will turn
off.
