Antenna
Disconnect the telescopic antenna (14) installed on the device from the holder and pull out the antenna. For the initial setup and the associated station search, it is advisable to
position the radio at a window or outdoors. Later, you can position the radio in the living room and make the best possible reception with the antenna.
Notes:
To ensure optimum reception performance, please note that the antenna is fully extended.
If necessary, you should test different locations to get the best possible reception.
On/Off, Standby Mode
When the unit is plugged in or the batteries are plugged in, pressing the power button on the front panel will put the unit in the operating mode or put it in standby mode during
operation.
In standby mode the date and time are displayed with reduced backlight.
Notes:
If you want to use the alarm function, the device must be in standby mode. In completely de-energized state no alarm is possible!
During battery operation, the standby function may affect the life of the batteries. If you do not use the device for a longer period, it is recommended to switch off the
device completely and remove the batteries!
Initial Installation
At initial startup or after a factory reset (page 7), you must configure the device as follows. Briefly press the power button on the front panel until the device starts and the display
illumination is activated. The unit now performs an automatic DAB + station search and starts on the first found radio station with the playback. During the search process, the dis-
play on the right side will show you the radio stations already found. The progress bar on the bottom lets you see how far the search has progressed.
Notes:
For the initial setup and the associated station search, it is advisable to position the radio at a window or outdoors.
Later, you can position the radio in the living room and
make the best possible reception with the antenna.
If you do not have DAB + reception in your environment, switch the device to the "FM" operating mode (page 5) after the initial setup and carry out a station search there
(page 6).
4
User Manual