Semi-Attended Transfer
Attended Transfer
Basic Call Features
Placing a Call
Answering a Call
Ending a Call
Call Mute and Un-mute
Redial
Call Hold and Resume
Call Conference
Call Forward
To place a call on hold:
Blind Transfer
Call Transfer
Speed Dial
To configure a speed dial key:
To use the speed dial key:
Using the handset:
Using the speakerphone:
Using the headset:
Using the handset:
Using the speakerphone:
Using the headset:
Using the handset:
Using the speakerphone:
Using the headset:
1. With the handset on-hook, press .
1. Pick up the handset.
2. Enter the number, and then press the
Send
soft key.
2. Enter the number, and then press the
Send
soft key.
Note:
During a call , you can alternate between headset, hands-free speakerphone and handset modes by
pressing the
Headset
key or the
Speakerphone
key or picking up the handset. Headset mode requires a
headset connected.
Note:
You can split the conference call into two individual calls by pressing the
Split
soft key.
Note:
You can ignore an incoming call by pressing the
Reject
soft key.
2. Enter the number, and then press the
Send
soft key.
Pick up the handset.
Hang up the handset or press the
Cancel
soft key.
Press the
Cancel
soft key.
Press to enter the
Dialed Calls
list, press or to select the desired call, and then
press or the
Send
soft key.
Press twice when the phone is idle to call the last dialed number.
Press to mute the microphone during a call.
Press again to un-mute the call.
Press or the
Hold
soft key during an active call.
You can transfer a call in the following ways:
1. Press or the
Transfer
soft key during an active call. The call is placed on hold.
To enable call forward:
Always Forward----
Incoming calls are all forwarded unconditionally.
Busy Forward----
Incoming calls are forwarded when the phone is busy.
No Answer Forward----
Incoming calls are forwarded when the phone is not answered
after a preset time period.
1. Press the
Menu
soft key when the phone is idle, and then select
Features
->
Call Forward.
2. Select the desired forward type:
3. Enter the number you want to forward to. For
No Answer Forward,
enter the ring time to wait
before forwarding.
4. Press the
Save
soft key to accept the change.
1. Press the
Conf
soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the
Send
soft key.
4. Hang up the handset to disconnect all parties.
1. Press the
Menu
soft key when the phone is idle, and then select
Features
->
DSS Keys
.
2. Select the desired DSS key, and then press the
Enter
soft key.
4. Press the
Save
soft key to accept the change.
Press the speed dial key to dial out the preset number.
3. Select
Speed Dial
from the
Type
field, select the desired line from the
Account ID
field, and enter
the number in the
Value
field.
in the conference.
3. Press the
Conf
soft key again when the second party answers. All parties are now joined
2. Enter the number you want to transfer to.
1. With the headset connected, press to activate the headset mode.
1. Press or the
Transfer
soft key during an active call. The call is placed on hold.
Press .
Press .
Press or the
Cancel
soft key.
To resume the call, do one of the following:
If there is only a call on hold, press or the
Resume
soft key.
3. Press or the
Transfer
soft key when you hear the ring-back tone.
3. Press or the
Transfer
soft key.
1. Press or the
Transfer
soft key during an active call. The call is placed on hold.
3. Press or the
Transfer
soft key when the second party answers.
If there is more than one call on hold, press or to select the desired call, and then
press or the
Resume
soft key.
2. Enter the number you want to transfer to, and then press .
2. Enter the number you want to transfer to, and then press .
XP0150G
Quick Reference Guide
XP0150G
Quick Reference Guide
