Xorcom GW0002, Быстрое руководство по установке

Страница: 3 / 4

Installation instructions
GW0002 works in two network modes: route mode and bridge mode. When it is under the route mode, the IP
address of WAN port must be at different network segment from that of the LAN port. But when it is under the
bridge mode, the IP address of WAN port is the same with that of LAN port.
Network Connection Diagram under Route Mode
Under the route mode, the default IP address of WAN port is a DHCP IP address, while the default IP address of the
LAN port is a static IP address, namely 192.168.11.1.
Note: The IP address of
LAN port of the GW0002
device and the IP address
of PC must be at the
same network segment,
while that of WAN port is
at a different network
segment.
Network Connection Diagram under Bridge Mode
Under the Bridge mode, the IP address of WAN
port is the same with that of LAN port. Generally,
when the device works under the bridge mode,
the IP address of the device has been modified. In
the following diagram, it is assumed that the IP
address has been modified into 172.16.80.1.
Note: The IP address of PC and that of WAN port
of the GW0002 device are at the same network
segment.
•
Log in Web Management System:
Open a web browser and enter the gateway’s IP address (default IP
is 192.168.11.1). Then input username and password in the displayed login GUI. Both the default username and
password are
admin
•
Modify Gatew ay’s IP Address:
If you want to modify the IP address of IAD-4S/8S,
please click ‘Network → Local Network’ in the navigation tree on the left of the Web Management System, and
then input new IP address and DNS server address on the displayed interface.
•
Configure SIP Server:
Log in the Web Management System of the gateway, and then click SIP Server in the
navigation tree and then enter the address of the SIP server which is to be registered. Click Save in the last.
GW0002
GW0002