Xoop Lighting EL 150.TW, Руководство пользователя

Страница: 11 / 16

10 . 0
Select dimmer switch 0-100%
Select CCT switch 2800K to 5600K white
Signal priority after boot:
1. DMX mode:
If the EL 150.TW detect an DMX signal, it will be controlled by this signal.
2. Master/Slave
The master is controlled by the dimmer CCT switch and controls all connected slaves. To change a slave to
master use the onboard control menu (Set/Master/Master) or turn the dimmer switch to 0%, pause 1 sec, turn it to
100% and pause 1 sec. This function will be disabled 60 sec. after boot.
3. Stand alone / No signal
The lamp is controlled by the position of the dimmer switch & the CCT switch.
Troubleshooting:
If there are more than one master in the line, than it is possible to force the other masters to change remotely to
slaves. This could be done by turning the dimmer of the selected master to 0%, wait 1sec, turn it to 100% and wait
again 1sec. Then all other masters switch remotely to slaves.This function will be disabled 60 sec. after boot.
50
40
30
2
0
1
0
0
60
70
8
0
9
0
10
0
2.
8K
4.2K
5.
6K