The UHF microphone is connected to the active speaker
(XT-20BA)
. But the UHF microphone has
no voice transmission.
Solution :
A- The UHF microphone is close to the active ceiling speaker within 1 meter,Turn on the active
speaker state.
B-
First of all press the (Power) (SET) button at the SAME TIME for 6 seconds, ( ID ) text will
appears on the display, Press and must hold,
C- Turn off the active speaker and restart. Release the button after 3-5 seconds.
D- The UHF microphone will automatically recognize the ID code.( After completing the operation, Avoid
the UHF microphone ID code cross-frequency interference. The UHF microphone automatically
connects.).
The UHF microphone is connected to the active speaker. But the UHF microphone makes
noise or interferes with the other UHF frequency .
Solution :
A-
The UHF microphone is 1 meter close to the host active speaker. Turn on the active
speaker state.
B-
Press the (Power) (SET) button both at the SAME TIME, The display will
shows the Symbol icon .
C- After the calibration frequency is completed, The display shows the symbol icon on the
Mic screen .
After completing the operation, The UHF of ID code both recognizes re-pairing.The
UHF microphone will automatically track ID code, The UHF microphone does not make noise.
