Automatic Answer
After the user enters the standby interface, manually operate key: menu - > function set, the terminal will
switch to the function setting interface, rolling screen to automatic redial setting by using the downward
navigation key. As shown in the following figure:
Figure 110 : Automatic Answering Setting
⚫
Command function: Automatic answer setting
⚫
Required parameters:
Automatic answer
Input mode:
select the corresponding left soft key.
Parameter description:
start automatic answer function
Delay time
Input mode:
input by hand, format - number
Parameter description:
Set the delay time.
Note:
After the user settings are completed, you must manually press the "OK" key to submit to save,
otherwise it will not take effect.